所有产品
G series light 15-16t (economic configuration) internal combustion counterbalanced forklift
Features
1. Engine: The Xichai CA6DF3-16GAG3U-HL10 engine is selected. The engine adopts the technical route of electronically controlled single pump + turbocharged intercooling, which complies with the national phase III emission standards. Etc.
2. Gearbox + torque converter: Heli's homemade gearbox + 340 torque converter is used. The gears are assigned to the first four and then the fourth. The intelligent shift can realize manual / smart shift mode switching.
3. Drive axle: Enhanced drive axle design:
1) Joint venture technology drive axle adopts caliper-type service brake, which has strong bearing capacity, reliable braking and convenient maintenance.
2) A large 16t forklift axle housing is selected to increase the bearing capacity of the axle housing by 15%;
4. Braking system: Pneumatic hydraulic braking system uses gas-top oil boosting technology, which can provide enough braking torque with a small operating force to ensure effective and reliable braking in various working sites. The hydraulic components in the caliper disc brake system are widely used in construction machinery such as heavy vehicles and loaders, and the accessories have good versatility.
5.Hydraulic system: It adopts full hydraulic priority steering quantitative system and valve stem operation.
6. Cooling system: The use of composite radiators, superior heat dissipation performance to ensure that all system components can work in good temperature conditions, effectively reducing the vehicle failure rate and improving vehicle reliability.
1) It integrates four layers of engine water cooling, engine air cooling, transmission oil cooling, and hydraulic oil cooling, which are directly driven by the engine and arranged in parallel to facilitate flushing and maintenance;
2) Brazing technology, aluminum radiator, reliable quality, large heat dissipation power.
7, the whole car LED lights, LED rotating warning lights.
Technical Parameters
Model | Unit | CPCD150-WX-06IIIG | CPCD160-WX-06IIIG | |
---|---|---|---|---|
载荷中心 | mm | 600 | 600 | |
起升重量 | kg | 15000 | 16000 | |
起升高度(标准) | mm | 3000 | 3000 | |
起升速度(满载) | mm/s | 350 | 350 | |
门架倾角 前/后 | Grad | 6/12 | 6/12 | |
发动机 | 锡柴 | 锡柴 | ||
外形尺寸 | 全长(含货叉) | mm | 6265 |
6265 |
全宽 | mm | 2780 | 2780 | |
全高(门架不升起) | mm | 3215 | 3215 |